Velleman CS5MXP Notice D'emploi page 6

ii. Disc 1
In the clicked off position, the CS-5MXP detects all metal objects.
Turned clockwise it becomes a fully variable discrimination control.
Discrimination is a means of ignoring objects which are generally regarded as junk whilst still detecting the
good objects.
At the lowest setting most iron objects are ignored. Increase the setting and the unit will ignore even larger
pieces of aluminium paper as well as iron.
At higher levels still, ring pulls will be ignored. You must, however, realise that at this higher setting you will
also lose some low denomination and silver hammered coins, so set the control only as high as necessary
to ignore iron and foil contamination (e.g. level 5 is typical).
CS5MXP
1. Disc 1
2. Disc 2
3. On/Off - Sensitivity
4. Pinpoint push select button
5. Disc 2 push select button
6. Boost
7. Signal Meter
- 6 - VELLEMAN