Cleaning; Cleaning Of Refrigerated Counter; Condenser's Built -In Unit Cleaning - ChefLine TAVOLO TN-BT Manuel D'installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 47
EN | Refrigerated Counters | User and Maintenance Manual

3. CLEANING

All the procedures must be carried out with the stationary unit removing the tension from both the
refrigerated item and the condensing unit.

3.1 CLEANING OF REFRIGERATED COUNTER

The maintenance of the apliance must include at least one daily cleaning of the loading zone, in order
to prevent the development and the accumulation of bacteria.
ATTENTION
It is essential to keep daily clean the apliance in order to prevent the development and the accumulation of
bacteria. Before cleaning the chamber of the apliance, you must execute a defrosting process, by removing the
lid of the drainage basin.
Do not fl ush directly the inner parts of the apliance because the electrical parts could get damaged.
Do not use any hard metal tools to remove the ice.
For the cleaning use only warm water (not hot) with no-aggressive detergents, taking care of
drying the wet parts with a soft cloth.
Avoid to use products that contain chlorine or diluted solutions, caustic soda, abrasive detergents,
muriatic acid, vinegar, bleach or other products that might scratch or grind.
We recommend to clean the device at least once a month, when it used for deep-frozen products.
Attention, during the cleaning operations it is recommended to use work gloves.

3.2 CONDENSER'S BUILT -IN UNIT CLEANING

Model REFRIGERATED COUNTER TN-BT:
The built-in refrigeration unit is positioned inside the table unit on the right hand side (for
counter units ordered in standard versions).
The condenser features sharp edges. Wear protective gloves when cleaning.
32
Any operation of cleaning must be done disconnecting the electric
power supply.
The condenser of the Counter with built-in unit must be cleaned, in normal
conditions of use of the Counter, at least once a month by using a vacuum
cleaner and a real-bristle brush.
It is advisable to use gloves since the reduced thickness of the wings can cut.
Dirty condensing unit reduce the output ofthe engine causing an increase of
energy consumption.
Take care not to damage the refrigerating fl uid circuit.
The unit is on the top of the Counter.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Saladette 2pSaladette 3p

Table des Matières