Makita 191M27-0 Manuel D'instructions page 5

Positioning the arm support
The arm support is useful when holding the extension
handle with single hand.
Loosen the clamping nut and adjust the arm support to
your comfortable position. After that, tighten the clamp-
ing nut firmly.
► Fig.9: 1. Arm support 2. Clamping nut
Installing the side grip
Side grip is useful when holding the extension handle
with both hands. Screw the thread of the side grip into
the mounting hole as shown in the figure.
► Fig.10: 1. Mounting hole 2. Side grip
All manuals and user guides at all-guides.com
5 ENGLISH