Technaxx TX-186 Manuel D'utilisation page 21

AUX mode
Playing Music from an AUX input
 Turn the unit ON by turn the volume knob (12).  Connect one end of
the 3.5mm AUX-IN cable (included) into the 3.5mm AUX-IN Jack on the
back panel of the unit and the other end to your audio device's (CD player,
Tablet, MP3 player, Smartphone etc.) AUX jack.
 Press PLAY on the external audio source.
NOTE:  The volume output is affected by the volume level on the source.
Ensure that the source volume is set to about 70-80% to avoid sound
distortion. Playback must be controlled from your connected audio device.
Headphone
Connect a headphone to the AUX-out 3.5mm jack (11). Set the mode you
want to listen to. Every mode is possible. Set the volume to a pleasant
setting and enjoy listen to your music.
Connecting to an external amplifier
 This feature enables you to play turntable music through amplifier or
external speakers. You will need an RCA cable to make this connection
(not included).
 Plug one end of the Red and White RCA jacks into the RCA output (15)
at the back of the TX-186 and the other end into R (red) and L (white)
sockets at the back of the amplifier or external speakers.
Recording audio to USB drive
This equipment has the capacity to encode your vinyl music into digital
format for record options directly to USB drive
 Insert the USB-drive into the USB slot (13).
 Get your music media ready for playback: place a record on the turntable
and start playing.
 The LP player will recognize the USB device
 It creates a new MP3-file to the USB device according play and pause.
 The file names have to be renamed according recorded files afterwards.
8
TX-186, 5000, 09/22