Publicité
Les langues disponibles
Les langues disponibles
STEP 2
Connect the Track to the Cross Bar
4. Track
5. Ramp
6. Diamond Bracket
11. Socket Wrench
12. Allen Key
13. Washers
14. Nuts
16. Bolts
Connect the Track to the Cross Bar by
placing the Track on top of the L-Piece.
Align the holes on the Track with the
holes on the L-Piece
Place the Diamond Bracket on top of the
Track so that the holes in the Diamond
Bracket are aligned with the holes in the
Track and the holes in the L-Bracket
Place a Bolt from the underside of the L
Piece through the corresponding holes in
the L-Piece, Track and Diamond Bracket,
so that the bolt end protrudes through
the Diamond Bracket. Place a Washer
and Nut on the protruding section of the
Bolt and tighten using the Allen Key and
Socket Wrench. Repeat for second hole.
The Track should now be secured to the
Cross Bar by 2 bolts.
Note: The Diamond Bracket and
L-Bracket should be parallel to one
another with a gap between them
All manuals and user guides at all-guidesbox.com
4
6
5
4
13
14
11
12
16
4
2
6
14
13
16
5
Publicité
