Thane Bike Nook Instructions De Montage page 15

All manuals and user guides at all-guidesbox.com
Step 6
Store your Bicycle
Roll the back wheel of the bicycle over the Ramp onto the Track, guiding the
fender or rack between the protruding Support Bars until either the wheel (in
case of a short fender) or the fender (in case of a long fender), or the rack
engages with the Sleeves on the Upright (see Fig 9).
Lift the front of the bicycle upwards and rotate it slowly to a vertical position
and slightly beyond until the seat post can be lowered to rest into the V-Slot.
Check that the bicycle is stable and securely positioned.
Also check that the fender or the rack fits snug between the Support Bars and
engages with the Sleeves on the Upright. In case of a long fender, it may rest
on the Sleeves on the Track.
Support Bar
to retain
rack/fender
FIG. 9
Bicycle with rack Bicycle with fender
13