Thane Bike Nook Instructions De Montage page 5

STEP 1
Connect L Piece to Cross Bar
Parts Required:
1. Cross Bar
2. L-Piece
3. Foot
11. Socket Wrench
12. Allen Key
13. Washers
14. Nuts
15. Long Bolt
17. Flathead Bolt
Connect the L-Piece to the Cross Bar by
aligning the arrow
the arrow on the Cross Bar so that both
arrows are facing in the same direction
Insert the Flathead Bolt into the L-Piece
and tighten using the Allen Key
Turn the Cross Bar over so that it is
resting on the Feet. Insert the Long Bolt
into the bottom hole of the L-Piece
Place a washer, followed by a nut, on the
protruding end of the Long Bolt. Secure
the Nut to the Long Bolt by using the
Socket wrench and Allen Key
All manuals and user guides at all-guidesbox.com
2
on the L Piece to
3
3 13
14
17 15 11
1
3
2
1
3
17
14
13
12
3
15