Bosch GOP 18V-28 Professional Notice Originale page 9

Application tool
PAIZ 32 APB
StarlockPlus
32 × 60 mm bi-
metal plunge cut
saw blade for wood
and metal
AIZ 32 BSPB
Starlock
32 × 50 mm bi-
metal plunge cut
saw blade for hard-
wood
AIZ 32 AT/
AIZ 32 AIT
Starlock
32 × 40 mm
carbide plunge cut
saw blade for metal
AIZ 32 APT/
AIZ 32 APIT
Starlock
32 × 40 mm
carbide plunge cut
saw blade for
multi-material
PAIZ 45 AT/
PAIZ 45 AIT
StarlockPlus
45 × 50 mm
carbide plunge cut
saw blade for metal
PAII 52 APT/
PAII 52 APIT
StarlockPlus
52 × 50 mm
carbide plunge cut
saw blade for
multi-material
AYZ 53 BPB
Starlock
53 × 40 mm
plunge cut saw
blade for multi-
material
AII 65 APB
Starlock
65 × 40 mm bi-
metal plunge cut
saw blade for wood
and metal
ACZ 85 EB
Starlock
85 mm diameter
bimetal segment
Bosch Power Tools
Material Application
Composite materials Quick and deep plunge cuts in wood, abrasive wooden ma-
made from wood and soft, terials and plastics, splinter-free work thanks to round cut-
non-ferrous metals, un- ting edge (Curved-Tec);
hardened nails and bolts, Example: Quick separation of non-ferrous pipes and pro-
pipes made from non-fer- files of smaller dimensions, easy cutting through non-
rous metal and profiles of hardened nails, bolts and steel profiles of smaller dimen-
smaller dimensions sions
Hardwood, laminated Splinter-free separation and plunge cuts in coated boards
boards or hardwood thanks to round sawing edge (Curved-Tec),
Japan toothing specially suited for hardwood;
Example: Installation of skylights, recess for plug sockets
Hard ferrous metals, ex- Sawing extremely abrasive materials or hard ferrous
tremely abrasive materi- metals; long service life thanks to BOSCH carbide techno-
als, fibreglass, plaster- logy;
board, cement-bonded Example: Cutting of kitchen front covers, simple sawing
fibreboards, hardened through hardened nails and stainless steel
nails and screws
Hard ferrous sheet metal, Splinter-free separating cuts and plunge cuts in sheet
epoxy, plasterboard, metal thanks to round sawing edge (Curved-Tec); long ser-
GFRP, CFRP, cement vice life thanks to BOSCH carbide technology;
fibreboard Example: Sawing through sheet metal, cutting through
screws in window frames
Hard ferrous metals, ex- Wide saw blade for sawing highly abrasive materials or
tremely abrasive materi- hard ferrous metals; long service life thanks to BOSCH
als, fibreglass, plaster- carbide technology;
board, cement-bonded Example: Cutting kitchen front covers, easy sawing
fibreboards, hardened through hardened screws and stainless steel
nails and screws
Hard ferrous sheet metal, Long saw blade for splinter-free separation and plunge
epoxy, plasterboard, cuts in sheet metal thanks to round sawing edge (Curved-
GFRP, CFRP, cement Tec); long service life thanks to BOSCH carbide techno-
fibreboard logy;
Example: Cutting through sheet metal, cutting through
screws in window frames
Gypsum boards, chip- Optimised for plunge saw cuts with a subsequent longer
boards, sandwich mater- separation cut; the Dual-Tec shape ensures a clean and
ial, wood complete cut both in the corners and during a longer sep-
aration cut;
Example: Plug socket recesses in gypsum boards or
wooden walls
Softwood, hardwood, Splinter-free separation and plunge cuts thanks to round
veneered boards, plastic- sawing edge (Curved-Tec) in coated boards or hardwood;
coated boards, non- Example: Shortening door frames, recesses in laminate
hardened nails and bolts flooring for a tray or built-in furniture, cutting through non-
hardened nails and bolts when flush with the surface
Wooden materials, Separation and plunge saw cuts;
plastic, soft and non-fer- also for sawing close to the edge in difficult-to-access
rous metals areas;
English | 9
1 609 92A 5NN | (05.06.2020)