Operation Instructions; Fill With Oil; Fill With Fuel - Zipper Maschinen ZI-DRM 51 Manuel D'utilisation

13 OPERATION

13.1 Operation instructions

 Mower should be started only with correctly mounted grass catcher or side discharge.
 Switch off the engine before adjusting the cutting height or before you empty the grass col-
lection container.
 Bring your hands or feet under the mower never or below the grass discharge chute.
 Remove before you start mowing, ask all foreign objects from the work area, which can be
thrown from, the device. Figure F
 Make sure that children, bystanders and pets always keep a safe distance to the appliance
while in operation.
 Raise your lawn mower to never, while you start the engine.
All work with the engine stopped and a complete stop of Cutter and removed spark
plugs perform!

13.1.1 Fill with oil

ATTENTION: The engine is delivered without oil.
Fill in 0.55 liter oil (15W40) before starting the
engine!
Between measures used by the dipstick -without tighten up-
between the upper max and lower min mark. Caution: Do not
overfill

13.1.2 Fill with fuel

Imortant: Environmentally friendly unleaded gasoline can be used safely.
- Refuel only the recommended fuel grades.
- Allow to cool before refueling machine.
- Clean area around filler cap well, unscrew the fuel filler cap and fill to
bottom of filler neck.
- Fuel filler cap back on tight screws.
Note: Fuel may contain substances similar to
• Avoid skin and eye contact with petroleum products.
• Wear gloves while refueling.
• Do not inhale fuel vapors.
• Keep fuel away from children
ANY FINAL JAM NUT AND BOLT ON ANY DEAD TIGHT!
WHILE OPERATING THE VIBRATING MACHINE STRONG, NOT TIGHTEN THE
SCREWS CAN BREAK OFF AND LOST AND DANGEROUS SITUATION TO BE
CARRIED!
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-DRM51
A T T E N T I O N
solvents.
A T T E N T I O N
OPERATION
28