Maintenance; Maintenance Plan; Air Filter - Zipper Maschinen ZI-DRM 51 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

14

MAINTENANCE

Don't clean or do maintenance on the machine while it is still connected to the power
supply:
Damages to machine and injuries might occur due to unintended switching on of the
machine!
The machine is low maintenance and contains little parts that must undergo a maintenance
Faults or defects that may affect the safety of the
work may only be performed by qualified personnel!
At regular intervals, you should also check the bolts and screws are tight. Worn or poorly tightened
nuts and bolts can cause serious damage to the engine or frame
Never store with filled tank or gas cans in a closed space where gasoline gases to escape and reach a
high temperature and can then inflame the
Motor cool the way before storing the
To reduce the risk of
fire, clean the mower, especially
grass
residues, leaves and
Regularly check the condition of the baffle plate and the grass
Replace these parts if they are
Before storage of the
Regularly check the oil level and add if
Frequently check the mower and ensure that any
Grass residues are located under the
Grease the wheel axle and the bearings.
Check the blade often to ensure a clean cut. The cutting blade should be sharp and well balanced
imbalance).
.
If the blade hits an
obstacle, stop the

14.1 Maintenance plan

Servicing period
Engine oil
Inspection
(15W40)
Change

Air filter

Inspection
Change
Spark plug
Inspection
Change
Provide appropriate servicing upon the earlier of the following: in the given month or after the
specified hours of operation (HOO) have expired.
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
ZI-DRM51
mower.
grease
residues.
damaged.
mower, you should
change the oil
necessary,
cover.
mower.
Before
any
using
X
X
A T T E N T I O N
machine, must be rectified immediately.
mower.
Let the
the engine, exhaust and fuel tank. Remove all
catcher.
add
oil.
After:
After:
1 month
3 month
5 HOO
25 HOO
X
MAINTENANCE
After:
After:
6 month
12 month
100 HOO
50 HOO
X
X
X
operator.
Repair
(no
After:
25 month
250 HOO
X
32

Publicité

Table des Matières
loading

Table des Matières