Makita DUS054 Manuel D'instructions page 13

1. Remove the battery prior to adding chemical liquid to the tank.
2. Hold the tank firmly and rotate it anti-clockwise so as to separate the motor housing from the tank. Refer to Figure 7.
3. Unscrew and remove the measuring cup.
4. Measure the recommended liquid. The cup can be used to measure up to 50 ml (2 oz) of liquid. Refer to Figure 8.
5. Carefully pour the liquid into the tank with measuring cup through the filling opening of the tank. You can also
dissolve chemical liquid in water completely in a separate container and then pour it into the tank. Make sure you
always pour chemical liquid into the tank through the filling opening of the tank rather than small opening which is for
measuring cup storage. Make sure that the tank filling strainer is in place. Refer to Figure 9.
6. Rinse the measuring cup with clean water.
7. Refit the cup, making sure it is tightened securely.
8. Insert the hose into the depressed part of the tank filling strainer. Refer to Figure 10.
9. Reattach the motor housing to the tank and rotate it clockwise to "Click". Refer to Figure 11.
*Container is not included.
Figure 7
Figure 9
Figure 11
Figure 8
Figure 10
13 English