Getting Started - GM Racing XG-6i Manuel D'utilisation

with safety. with safety.
Liability exclusion / Compensation Liability exclusion / Compensation
As manufacturers, we at GRAUPNER are not in a position to infl uence the way you install, ope- As manufacturers, we at GRAUPNER are not in a position to infl uence the way you install, ope-
rate and maintain the radio control system components. For this reason we are obliged to refu- rate and maintain the radio control system components. For this reason we are obliged to refu-
te all liability for loss, damage or costs which are incurred due to the incompetent or incorrect te all liability for loss, damage or costs which are incurred due to the incompetent or incorrect
use and operation of our products, or which are connected with such operation in any way. use and operation of our products, or which are connected with such operation in any way.
Unless otherwise prescribed by law, the obligation of the GRAUPNER company to pay com- Unless otherwise prescribed by law, the obligation of the GRAUPNER company to pay com-
pensation is limited to the invoice value of that quantity of GRAUPNER products which was pensation is limited to the invoice value of that quantity of GRAUPNER products which was
immediately and directly involved in the event in which the damage occurred. immediately and directly involved in the event in which the damage occurred.
This does not apply if GRAUPNER is found to be subject to unlimited liability according to bin- This does not apply if GRAUPNER is found to be subject to unlimited liability according to bin-
ding legal regulation on account of deliberate or gross negligence. ding legal regulation on account of deliberate or gross negligence.
TRANSMITTER TRANSMITTER
Antenna
EPA Steering
Servo-Reverse
Steering
Power LED
ON/OFF-Switch
LED ST.D/R
Charging socket
Failsafe
Servo-Reverse
Throttle
EPA Throttle

GETTING STARTED

1. Place 8 AA batteries in the battery compartment in the bottom of the transmitter. Pay
attention to the polarity! If the batteries are loaded incorrectly, the transmitter may be
damaged. When the transmitter will not be used for a longer period of time, always remo-
ve the batteries.
2. Connect and install the receiver and servos.
Attention:
The transmitter comes with an Futaba style charge socket for the use with Char-
ging-Cord No. 3022.65! Do not use any other Graupner charging cord, this may
destroy the batteries.
94002 GM-Racing XG-6i 2.0 FHSS Sport Spec
Batt. (4.8 - 6.0 V)
Channel 3 - AUX
Channel 2 - Throttle
Channel 1 - Steering
AUX-Channel
Steering Trim
Steering wheel
Throttle Trim
Throttle lever
Steering ST.D/R
Battery Case
-
+
I
-
+
I
-
+
I
-
+
I
14