Zephyr ARC ALU-E43ASX Notice D'utilisation page 21

CONNECT THE WIRES (1 INTERNAL MOTOR)
Note: This range hood must be properly grounded. The unit should be installed by a
qualified electrician in accordance with all applicable national and local electrical codes.
1. Make connections (A, B,C, D) (Fig.24).
2. Secure capacitor box screwing the (2) 3.9x9.5 mm screws (Fig.24D).
A
CONNECT THE WIRES
(2 INTERNAL
MOTORS)
Note: This range hood must be
properly grounded. The unit
should be installed by a qualified
electrician in accordance with all
applicable national and local
electrical codes.
1. Make connections (A) (Fig.25).
D
B
- 21 -
(2) MOUNTING SCREWS
(3.9 x 9,5 mm)
GROUND
A
C
FIG.24
FIG.25