Publicité
Les langues disponibles
Les langues disponibles
REMOTE CONTROL
SYNCHRONIZATION:
To synchronize the remote control with the range hood for the first time, proceed as
follows:
1. With range hood off, press and hold the "light" button on the range hood until the light
indicator begins to flash (approximately 3 seconds) (Fig.1).
2. Press the "light" button more times on the remote control until the lights on the hood
turn on (Fig.2).
The range hood may now be activated using the remote control. If you experience any
problems, repeat the procedure.
1
GENERAL INFORMATION:
- The remote control has a range of approximately 15 feet.
- The remote control is equipped with a magnetic base and may be attached to ferrous
surface for easy storage.
- The remote top is made of a plastic material and is prone to scratches.
Use care when handling and cleaning the remote; we suggest using a microfiber cloth to
clean it.
- The remote control will enter a sleep mode after 20 seconds of inactivity to conserve
battery life. Press any button for one second to wake the remote.
BATTERY REPLACEMENT:
The batteries will last approximately 8 months, depending on usage.
1. Remove rubber cover from bottom (Fig.3).
2.Using an object such as a screwdriver or pen, gently place it in the center opening in
the bottom of the remote and push inwards to dislodge the top touch panel from the
remote body. (Fig. 4)
3. Press on the metal spring located in the battery tray to dislodge battery. Replace both
batteries with type 3V CR2450 (Fig.5). Re-assemble by following instructions in reverse.
3
4
- 11 -
2
5
Publicité
