Publicité
Les langues disponibles
Les langues disponibles
INSTALLING THE DUCTWORK:
INTERNAL BLOWER
NOTE: To reduce the risk of fire, use only
metal ductwork.
1. Decide where the ductwork will run
between the hood and the outside.
2. A straight, short duct run using a minimum
6" round duct (10" round duct for the dual
blower) will allow the hood to perform most
efficiently.
3. Long duct runs, elbows, and transitions will
reduce the performance of the hood. Use
as few of them as possible.
4. Install a roof cap. Connect round metal
ductwork to cap and work back towards
hood location. Use duct tape to seal the
joints between ductwork sections (Fig.4).
5. The blower can be rotated according to the
air outlet location. See Fig. 5 and 6.
Ducted version
Hood with 1 internal blower
Non-Ducted version
- 15 -
6" or 10"
*
round duct
48" to 72" above
cooking surface
* 6" : hood with 1 internal blower
* 10" : hood with 2 internal blowers
Hood with 2 internals blowers
6"
48" to 72" above
cooking surface
ROOF CAP
FIG. 4
FIG. 5
round duct
AIR
RETURN
VENT
FIG. 6
Publicité
