Publicité
Les langues disponibles
Les langues disponibles
will take the water from the tank and pour it onto the cooling pad. Cooling pad
absorbs the heat of the water and the evaporated air is blown out by the help of fan.
The cool breeze blown by the cooler drops the temperature and creates a relaxing
cooling effect.
Caution: If the water level is low or there is no water in the tank, do not activate the
'Cool' function. Check the water level and add water if needed. Replace the stale
water with fresh water. It is recommended to replace water in the tank at least once in
a week.
7.Ionizer: Press 'Ion' button to activate the ionizer function. Ion icon on the screen
will light and the negative ion release will start. Ions attract to tiny particles in the air
such as dust, pollen, mold spores etc. Which cause them to become too heavy to
remain airborne. This feature let us to have dean air in the environment.
8.Remote control: It is with CR2025 button cell. Before use, please pull out the card
which is inserted at the button of the remote control.
Operating the Water Tank
Check the level of water in the tank frequently. Be sure that water level is not below
the 'MIN' marking which is located on the water tank. Activating the 'Cool' function
with insufficient amount of water may cause malfunction of the water pump and the
warranty of your product will be void.
Before refilling water, turn your unit to 'Off' position by pressing the switch located
on the back panel and unplug the power cord.
Using the Ice Boxes
In order to increase the cooling effect of your fan, you can use ice boxes which are
supplied with the unit. Before using, place them in the freezing compartment of your
refrigerator for a few hours. Then place them into the large section of the tank and add
water to the 'MAX' level. Using the ice boxes will drop the temperature of the air
flow which will create more effective cooling effect.
Safety Precautions
1. Make sure this appliance and the power cord is not damage before operating. In
case of damage, please consult to your authorized technical service.
2. Do not take out water tank before unplugging the power cord plug.
3. Do not insert or allow objects to enter any ventilation or exhaust opening as this
may damage the product and could cause an electrical shock or fire.
4. Do not operate your unit with a cover on it as this may result overheating and
motor damage.
5. The plug must be removed from the electrical outlet when not operating and before
moving, installing, uninstalling and cleaning.
6. Do not add any chemical, metal ingredients into the water tank. These materials are
Publicité
