Publicité
Les langues disponibles
Les langues disponibles
EN
Technical Specifications
⚫
Rated Voltage : 220-240V~
⚫
Rated Frequency: 50Hz
⚫
General Power: 80W
⚫
Water Tank Capacity: 12L
Assembly of the Air Cooler
1.Remove the packaging carefully taking care not to damage the plastic body with the
scissors or knife
2.Installation of Wheels: place 4 wheels to the holes located at the base of the air
cooler. Insert the wheels tightly to the air cooler's body.
3.Set the unit on a stable and horizontal base,keeping it away from radiating heat
sources and naked flame.
3. Filling Water: Turn the water tank lock to horizontal position, taking out the water
tank, put in the ice boxes and add clean tap water to the tank. Be sure that water level
in the tank does not exceed the level "MAX" which is located at the back of the tank.
3.Push the water tank to its housing and turn the tank lock to the vertical position.
Operating the Air Cooler
Insert plug to the electrical outlet. The LED indicator showing the room temperature
lights and the air cooler switches to the stand by position. The functions of the unit
can be controlled via board control panel or by remote control.
1.ON/OFF: Press the "ON/OFF" button on the control panel or press the ON/OFF
button on the remote control to turn the unit on. The unit will start at low speed and
normal wind. To switch back to the standby position, simply press the ON/OFF
button on control panel or press the ON/OFF button on the remote control.
2. Speed: Wind speed can be adjusted to 3 levels as low---mid—high by pressing the
'Speed' button. Each time the 'Speed' button is pressed, an icon will appear on the
LED screen indicating the current speed level.
3. Wind: Press the 'Wind' button to choose the wind type. Each time this button is
pressed, an indicator will light on the screen to indicate the type of wind. There are 3
types of winds to choose： Normal—Natural—Sleep
4. Timer: Press 'Timer' button to set the fan running time between 0-12 hours, which
switches the unit to standby after preset time. Each time the button is pressed, the
hours will increase one by one and the time indicator will light on the screen.
To cancel the timer, simply press the button until the indicator shows"00"
5. Swing: Press 'Swing' button to change the wind direction. The swing icon will
appear on the screen when the function is activated. Press the button again to stop the
oscillation. The vertical direction of air flow can be adjusted manually by directing
the outlet louvers up and down.
6. Cool: To activate the air cooler function, please press the 'Cool' button. Water pump
Publicité
