GE HFW350 Guide De L'utilisateur page 24

REVERSING THE DOOR SWING (Optional)
REMOVE, REVERSE AND
3
REPLACE THE DOOR STRIKER
• Remove the 2 screws from the striker. Rotate the
striker 180° and reinstall the striker with its screws.
24
Installation Instructions
REMOVE THE DOOR STRIKER
4
ASSEMBLY AND REPLACE ON
THE OPPOSITE SIDE
• Remove the 2 screws from the striker assembly and
remove the assembly by pulling it toward the center,
pushing it up and pulling it out.
• Rotate the striker assembly and replace it on the
opposite side with its screws.
49-3000217 Rev 5