Operation; To Start The Engine - CERTIFIED 060-0190-2 Guide D'utilisation

18
model no. 060-0190-2

OPERATION

Start and stop the engine
WARNING: the blade begins to rotate as soon as the engine is started.
NOTE: do not operate the machine in enclosed or poorly-ventilated areas as the exhaust
gas contains toxic substances.
Keep hands, feet, hair and clothing away from all the moving parts of the machine. The
exhaust and other parts of the machine will become hot during use.
Make sure that the blade is securely fastened before starting the engine.
NOTE: to start the engine, make sure that the spark plug cover is located on the plug and
the machine is filled with sufficient oil and gas.

To start the engine

As shown in Figs. 16 to 18.
1. When starting a cold engine, press down the
primer fully 3-5 times.
WARNING! Too many presses on primer
may cause engine flooding. When starting
a warm engine, the primer does not need
to be used. If the engine stops due to a lack
of gas, refill then press the primer 3-5
times.
2. Stand behind the mower. Pull the engine
start/stop lever toward upper handle
with one hand and place the other hand
on the starter handle (see Fig. 17).
I
contact us: 1-844-428-7277
Fig. 16
Fig. 17