Operation - CERTIFIED 060-0750-0 Guide D'utilisation

16
model no. 060-0750-0 I contact us: 1-844-428-7277

OPERATION

Start and stop the engine
WARNING: the blade begins to rotate as soon as the engine is started.
NOTE: do not operate the machine in enclosed or poorly-ventilated areas as the exhaust
gas contains toxic substances.
Keep hands, feet, hair and clothing away from the moving parts of the machine. The
exhaust and other parts of the machine will become hot during use.
Make sure that the blade is securely fastened before starting the engine.
NOTE: to start the engine, make sure that the spark plug cover is located on the plug and
the machine is filled with sufficient oil and gas.
To start the engine
As shown in Figs. 14 to 16
1. When starting a cold engine, press down
the primer fully 3-5 times.
WARNING! Too many presses on primer
may cause engine flooding. When
starting a warm engine, the primer
does not need to be used. If the engine
stops due to a lack of gas, refill then
press the primer 3-5 times.
2. Stand behind the mower. Pull the operator
presence control bar toward upper handle
with one hand and place the other hand on
the starter handle (see Fig. 15).
Fig. 14
Fig. 15