CERTIFIED 060-0190-2 Guide D'utilisation page 15

14
model no. 060-0190-2
Checking and filling engine oil
As shown in Figs. 11 to 13.
CAUTION! The following procedures and
adjustments must be performed before the
engine is started.
Do not attempt to make any of these
adjustments while the engine is running.
CAUTION! To prevent engine damage the
engine is shipped without oil or gas.
The engine must be filled with the correct
grade of oil and gas before starting the
engine.
NOTE! Running the engine with a low oil level will cause engine damage. It is recommend
that high detergent, premium quality 4-stroke engine oil be used. Using non-detergent oil
can shorten the engine's service life, and using 2-stroke oil will damage the engine.
CAUTION! Always use high quality detergent oil classified SAE30 oil (or equivalent, such
as SAE 10W/30, often termed as 4-stroke lawnmower oil).
Never use additives with recommended oil.
To prolong the life of your engine it is important that the oil is changed after the first 5
hours of use.
NOTE: To check the engine oil level, stop engine and place the mower on a level surface.
1. Remove the oil filler dipstick and wipe oil
from it with a clean cloth (see Fig. 11).
2. Insert the dipstick into the oil filler neck,
but do not twist it closed (see Fig. 11-1).
I
contact us: 1-844-428-7277
Fig. 11
Fig. 11-1
Engine oil filler neck