CERTIFIED 060-0190-2 Guide D'utilisation page 29

28
model no. 060-0190-2
Fault/malfunction
Loud while running,
machine vibrates heavily.
Engine does not start.
Engine runs unsteadily.
Uneven mowing results.
Grass bag is not filled
sufficiently.
I
contact us: 1-844-428-7277
Cause
Screws are loose.
Blade fasteners are loose.
Blade is unbalanced.
Start/stop lever not
pressed.
Spark plug is defective.
Cutting blade is worn or
damaged.
Fuel tank is empty.
Engine may be flooded.
Air filter is soiled.
Spark plug is soiled.
Blade is blunt.
Cutting height is too low.
Blade is worn.
Grass bag is clogged.
Cutting height is not right.
The lawn/grass is wet.
Discharge channel/housing
is blocked.
Underside of the mower
deck is clogged.
Remedy
Tighten screws.
Tighten blade fasteners.
Replace blade.
Press start/stop lever.
Replace spark plug.
Have the blade replaced at
a customer service centre.
Refill with fuel.
Remove plug and dry.
Clean the air filter.
Clean the spark plug.
Sharpen the blade.
Set correct height.
Replace the blade.
Empty the grass bag.
Correct the cutting height.
Allow the lawn to dry.
Clean the discharge
channel/housing.
Clean the underside of the
mower deck.