Worx D-Tail WX647 Notice Originale page 11

NOISE INFORMATION
A weighted sound pressure
A weighted sound power
K & K
PA WA
Wear ear protection when sound
pressure is over
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 60745:
Typical Vibration emission value a
weighted
Uncertainty K = 1,5m/s²
vibration
The declared vibration total value may be used for
comparing one tool with another, and may also be used
in a preliminary assessment of exposure.
WARNING: The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the tool
is used dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it
is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design and
these instructions.
L : 78,3dB(A)
pA
This tool may cause hand-arm vibration syndrome
L : 89,3dB(A)
if its use is not adequately managed.
wA
3.0dB (A)
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
80dB(A)
should take account of all parts of the operating cycle
such as the times when the tool is switched off and when
it is running idle but not actually doing the job. This may
significantly reduce the exposure level over the total
working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions
and keep well lubricated (where appropriate).
= 3,710m/s²
If the tool is to be used regularly then invest in anti
h
vibration accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
ACCESSORIES
Velcro sanding paper (perforated)
Sanding paper dedicated for
painting removing
Finger sanding sheet
Finger pad
Dust collection adapter
11
WX647 WX648
6pc 9pc
3pc 6pc
3pc 6pc
1pc 1pc
1pc /