Publicité
Les langues disponibles
Les langues disponibles
maintenance (Continued)
For this reason the linear convector must be inspected regularly, depending upon
conditions and at least at yearly intervals. Once cleaning is complete replace the
front cover and restore power.
W arning: The user can perform cleaning ONLY, all other servicing should
be performed by qualified service personnel.
Warranty
The Manufacturer warrants the linear convector and components of the enclosed
product against any defect in material or workmanship for a period of one year from
the date of purchase. With the exception of the elements which are warranted to
be free from defect in material and workmanship for ten years. In full satisfaction
of any claims under this Warranty the Manufacturer will repair or replace without
charge, in its factory or in the field as it alone may decide, any parts which in its
opinion are defective.
figure 1
figure 7
3 in (7.62 cm)
Wiring inSTrUCTiOnS/ inSTrUCTiOnS De CâbLage
CaUTiON: Do not bypass or eliminate thermal cutout from the circuit./ Ne pas contourner ou éliminer le coupe-circuit thermique du circuit.
CaUTiON: Check tightness of all electrical connections and wire nuts. / Vérifier que toutes les connexions électriques et serre-fils sont bien serrés.
CaUTiON: grounding connection is required. / Une prise de terre est requise.
LEGEND:
Thermal cutout
LÉGENDE:
Coupe-circuit thermique
faCTOrY Wiring/CabLage en USing DU COnveCTOr LineaL
Thermal cutout
Coupe-circuit thermique
Heating Element
Element chauffant
2
All manuals and user guides at all-guides.com
figure 2
figure 5
1.5 in (3.81 cm)
1.5 in (3.81 cm)
min
1.5 in
6 in (15.24 cm)
(3.81 cm)
min
min
Heating element
Élément chauffant
The Manufacturer shall not be responsible for any transportation or shipping
costs in relation to such repair or replacement except as specifically assumed
by it. Misuse of this product or repairs by persons other than the Manufacturer's
authorized personnel without the Manufacturer's written approval, will void this
Warranty.
This Warranty is in lieu of all other warranties or conditions whether express or
implied including but not limited to those of merchantability or fitness for purpose
and shall constitute the sole remedy of the Purchaser and the sole liability of the
Manufacturer in respect of the sale of the product, whether in the nature of breach
or breach of fundamental term, or of negligence or otherwise.
The Manufacturer shall not be liable for any special, indirect or consequential
damages or for any damages resulting from removal or replacement of a linear
convector subject to warranty claim without the Manufacturer's authorization.
This Warranty is transferable by the original consumer purchaser of the product.
Any claims under this Warranty must be submitted in writing to the Service
Manager, Dimplex North America Ltd., 1367 Industrial Rd., Cambridge, Ontario
N1R 7G8, Canada.
figure 3
figure 6
min
min
Ground
Mise à la terre
figure 4
3 in (7.62 cm)
min
3 in (7.62 cm)
min
Wire nut connection
Serre-fils connexion
Wire nut connection
Serre-fils connexion
Ground
Mise à la terre
Nameplate
La plaque
www.dimplex.com
Publicité
