Publicité
Les langues disponibles
Les langues disponibles
TAPE GUN HOLDER
NOTE: Tape Gun holder can be attached to
uprights or bin rail.
1.
If attaching to bin rail, no assembly is needed.
Place the back folded lip of the bracket over the bin
rail. Push down to ensure it is set firmly in place.
(See Figure 31)
Figure 31
2. If attaching to uprights, slide tape gun upright
bracket underneath tape gun holder and align the
holes in the bracket to the holes on top of the holder.
Attach with two M5 x 10 mm pan head screws and
two M5 flange nuts using a Phillips screwdriver and
8 mm wrench. (See Figure 32)
Figure 32
3. Align gun holder and upright bracket with uprights
at desired height.
4. Secure to uprights with two M6 x 40 mm hex bolts
and two M6 flange nuts. (See Figure 33)
Figure 33
PAGE 9 OF 27
All manuals and user guides at all-guides.com
OPTIONAL ACCESSORIES CONTINUED
1-800-295-5510
uline.com
FAN ASSEMBLY
NOTE: Fan comes with 6" and 10" long bracket.
Choose desired bracket based on application.
1.
Slot 6" or 10" fan mounting bracket between opening
in fan upright mounting bracket. Align holes of each
bracket and attach using two M6 x 12 mm hex bolts
and two M6 flange nuts. (See Figure 34)
Figure 34
Upright Mounting Bracket
Fan Mounting Bracket
2. Align hole on the opposite end of fan mounting
bracket to the hole on the crescent fan bracket.
Attach using M12 x 20 mm hex bolt, M12 washer,
M12 lock washer and M12 hex nut. (See Figure 35)
Figure 35
3. Align fan assembly with uprights at desired height.
4. Secure to uprights with two M6 x 40 mm hex bolts
and two M6 flange nuts. (See Figure 36)
Figure 36
0621 IH-7630
Publicité
