Télécharger Imprimer la page

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

H-7684
MESH STACKABLE
CHAIR
TOOL NEEDED
Allen Wrench
(Included)
Seat Cushion x 1
5
Screw x 4
1. Align side frames with holes on back cushion and
attach using four 1/4 x 3/4" screws (5). (See Figure 1)
NOTE: Do not tighten screws until the end.
Figure 1
PAGE 1 OF 6
1-800-295-5510
uline.com
Back Cushion x 1
6
Screw x 4
1/4 x 3/4"
1/4 x 1"
5
PARTS
Side Frame x 2
Hardware Kit
7
Screw x 4
1/4 x 1¼"
ASSEMBLY
2. Align side frames with holes on underside of seat
cushion and attach plates using four 1/4 x 1" screws (6).
(See Figure 2)
Figure 2
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
Seat Cover x 1
8
Screw x 4
1/4 x 1½"
6
Cover x 2
0921 IH-7684

Publicité

loading

Sommaire des Matières pour Uline H-7684

  • Page 1 Para Español, vea páginas 3-4. Pour le français, consulter les pages 5-6. H-7684 1-800-295-5510 uline.com MESH STACKABLE CHAIR TOOL NEEDED Allen Wrench (Included) PARTS Seat Cushion x 1 Back Cushion x 1 Side Frame x 2 Seat Cover x 1...
  • Page 2 4. Use Allen wrench to fully tighten all screws. Figure 6 5. Position seat cover over seat cushion and secure using four 1/4 x 1¼" screws (7). (See Figure 4) Figure 4 1-800-295-5510 uline.com PAGE 2 OF 6 0921 IH-7684...
  • Page 3: Herramienta Necesaria

    H-7684 800-295-5510 uline.mx SILLA ESTIBABLE DE MALLA HERRAMIENTA NECESARIA Llave Allen (Incluida) PARTES 1 Asiento 1 Respaldo 2 Armazones Laterales 1 Cubierta de 2 Tapas Asiento Kit de Tornillería 4 Tornillos 4 Tornillos 4 Tornillos 4 Tornillos 1/4 x 3/4"...
  • Page 4 4. Utilice la llave Allen para apretar por completo Diagrama 6 todos los tornillos. 5. Posicione la cubierta del asiento sobre el asiento y fíjela usando cuatro tornillos de 1/4 x 1¼" (7). (Vea Diagrama 4) Diagrama 4 800-295-5510 uline.mx PAGE 4 OF 6 0921 IH-7684...
  • Page 5: Outil Requis

    H-7684 1-800-295-5510 uline.ca CHAISE EMPILABLE EN MAILLE OUTIL REQUIS Clé Allen (inclus) PIÈCES Siège x 1 Dossier x 1 Cadre latéral x 2 Couvre-siège x 1 Cache x 2 Matériel d'installation Vis x 4 Vis x 4 Vis x 4...
  • Page 6: Montage Suite

    4. Utilisez la clé Allen pour serrer complètement toutes Figure 6 les vis. 5. Alignez le couvre-siège sur le siège et fixez-le avec quatre vis de 1/4 x 1 ¼ po (7). (Voir Figure 4) Figure 4 1-800-295-5510 uline.ca PAGE 6 OF 6 0921 IH-7684...