Publicité
Les langues disponibles
Les langues disponibles
LIGHT KIT ASSEMBLY
1.
Line up light brackets (12) with uprights at desired height.
2. Secure to uprights with four 2" bolts and flange nuts.
(See Figure 25)
Figure 25
Flange
Nut
Bolt
3. Place light steel beam (13) at desired depth
underneath brackets. Fasten to brackets with two 4¾"
bolts and flange nuts. (See Figure 26)
Figure 26
4¾"
Steel Beam
Bolt
Flange Nut
4. Place two "S" hooks (14) at desired mounting points
along the steel beam and secure with two flange
nuts. (See Figure 27)
Figure 27
PAGE 8 OF 27
All manuals and user guides at all-guides.com
OPTIONAL ACCESSORIES CONTINUED
4¾"
Bolt
Flange Nut
5. Attach hanging chains to LED shop light (11) and
mount to "S" hooks. (See Figure 28)
Figure 28
TABLETOP POWER STRIP ASSEMBLY
1. Choose desired location for power strip (15). Place
two supplied mounting clips roughly 32" apart
(clip side up). Using an electric drill, fasten to tabletop
with two supplied wood screws. (See Figure 29)
Figure 29
2. Secure power strip by snapping into the mounting
clips. (See Figure 30)
Figure 30
0621 IH-7630
Publicité
