Publicité
Les langues disponibles
Les langues disponibles
Problem
When I program the alarm or sleep
cycle using the back-up batteries
as the power source and later use
the AC adapter to plug the unit into
a wall outlet, the alarm and sleep
cycles do not function properly.
Lamp does not light during wake
and sleep modes.
No light.
No radio or no sound.
Alarm doesn't function.
Cleaning
Disconnect the Rise & Shine from the power outlet. Use only a dry, soft cloth and a
mild non-abrasive cleaner to clean the lamp.
CAUTION:
Do not use solvents or cleaners containing abrasives, or ammonia-
based cleaners on this product.
CAUTION:
After cleaning, properly wipe and dry the lamp prior to restoring power.
Rise & Shine
Serenity™ Natural Alarm
®
Clock & Sleep System
Dimensions 7.6"H x 2.5"D x 7.3"W
LCD Display — Dimensions: 1.5"H x
2.5"W Oval
Environment — Operating Temperatures:
15°C to 35°C; 56°F to 95°F; Storage
Temperatures: 0°C to 40°C; 32°F to 104°F
Relative Humidity: 5% to 95% non-
condensing
LEDs — Quantity: 21
Power
Input Power: 5V DC, 1.2 AMP from a
VA06F_MAN_Rev4.indd 15
Troubleshooting — continued
Solution
Install new or fully charged batteries and reprogram the alarm and sleep cycles, or
program them with the Rise & Shine plugged into the wall outlet.
For proper alarm lamp operation:
1) complete setting and activating the alarm at least 30 minutes before you want it
to sound.
2) make sure the power cord is plugged in. The lamp will not function when the
unit is on battery power.
In the standard time mode, tap the top of the unit. In the programming mode,
recheck programming instructions.
NOTE: When the unit is running on back-up batteries, the light will not work.
Check the volume by pressing the
to the sound you've programmed. Use the
Verify the correct AM/PM setting.
Verify that the alarm is activated. An alarm is activated if an alarm or icon is showing
in the LCD display and the clock is displaying the time of day. If not, press the
WAKE button to activate the alarm or initiate alarm programming. (See page 11.)
Care and Maintenance
Technical Specifications
Job#: 0.0???
Title: VA06 French Canadian Manual TRIM to A5 (148x210mm)
Date: 11/02/2015
Version: VA06_MAN_Rev4
Volume button twice. This activates the audio
or
Power — continued
120/240 VAC, 50/60Hz AC/DC Convertor
4.5V DC from 3 Type AAA Alkaline
Batteries.
Recommended AC/DC Converter Line
Cord is SWITCHING POWER SUPPLY
MODEL S006MU0500120.
ETL/CETL Listed
Cord/Plug — Plug Type: Non-polarized/
USA two prong 60" cord length
Intellectual Property — Patent: 6,236,622;
Trademark: Rise & Shine
Safety — ETL/CETL Listed
Warranty — One–Year Limited
15
buttons to adjust the volume.
, Serenity™
®
11/2/15 5:18 PM
Publicité
