Description Of The Controls - AEG BSS 4828 Mode D'emploi

Masquer les pouces

Table des Matières

Les langues disponibles

NOTE:

• Depending on the device manufacturer, you need to

perform the registration (PAIRING) again to connect the

devices.

• In case of problems during repairing of a playback

device, deactivate the WiFi-/ and mobile data function

in your playback device.

• The Bluetooth compatibility cannot be ensured for

devices (e.g. mobile phones) getting released in the

future.

• To ensure an optimal connection, make sure that the

battery of your player is completely charged.

• Some of the mobile phone brands have an energy-sav-

ing mode. Deactivate the energy-saving mode as it can

otherwise result in problems during the data transfer

through Bluetooth.

• To be able to transfer audio data, Bluetooth needs to

stay activated in your player Observe the operation

manual of your player.

• If a mobile phone on which you are playing music

receives a call, the music will be interrupted. Sound

will however not be transmitted via the speakers. After

you have terminated the phone call, the devices will be

connected to each other again. You may have to restart

playback.

AUX IN 1 & AUX IN (white/cyan)

Do you want to listen to music from an external audio source,

such as a PC or CD player, on these speakers?

1. Use the correct input cable (not included) and connect it

from the audio source to one of the AUX inputs.

NOTE:

Does your audio source have a controlled audio out-

put? Then adjust it to a moderate volume.

2. Start the track on your audio source.

3. Use the SOURCE button to select the correct AUX input

4. Adjust the volume with the VOL + or VOL - buttons.

USB Function (yellow)

NOTE:

This system has been developed according to state of the

art USB technology.

In spite of this, we cannot guarantee full compatibility, since

the number of different USB storage media and the differ-

ent software programs is too great.

Therefore, in rare cases there may be problems with USB

storage media playback.

This is not a malfunction of the system.

CAUTION: Avoid interference from other devices!

• Whenever possible, always connect a USB storage

device directly!

• If this is not possible, use input cables which are shorter

than 100 cm!

1. Press the SOURCE button repeatedly until the indicator

lamp lights up yellow.

2. Connect a USB storage device.

3. Playback begins after a few seconds.

For operation, please refer to the section entitled "Description

of the controls".

NOTE:

The USB port is also suitable for charging.

CAUTION:

Before you remove the USB storage device, switch to

another operating mode! To do so, press the SOURCE

button.