Reolink Argus 3 Mode D'emploi page 3

Set up Camera Via Reolink App on Smartphone
To set up Reolink camera, please follow the steps below:
1. Download and install the Reolink App on App Store (for iOS) or
Google Play (for Android).
2. Power on the camera.
3. Launch the Reolink App, click the " " button on the top right side and scan the QR code to add
the camera. Then, follow the onscreen instructions and camera voice prompts to complete the
setup procedure.
3 English
All manuals and user guides at all-guides.com
NOTICE:
• Reolink Argus 3 camera only supports 2.4 GHz Wi-Fi. 5 GHz is not supported.
• Your family can click "Access Camera" for live view after the initial setup.
Available on the Get it on Add the Camera to Reolink Client on PC
After setting up the camera, you can add it to Reolink Client and access the camera on your PC.
Here is a detailed how-to guide:
1. Download and install the Reolink Client from Reolink official website:
https://reolink.com/software-and-manual/
2. Launch Reolink Client, click "
Menu
choose "Scan Device in LAN".
Add New Device
3. Double click on the camera you want to add.
Enable/Disable PIR Motion
NOTICE: If the computer is not under the same LAN of the camera, you need to choose "UID" and
Sensor (The PIR sensor is
type in the information to add the device.
enabled by default.)
Device Settings 4. Input the password that you created via Reolink App earlier.
5. Click "OK" to log in.
Live View
NOTICE: To save power, the camera will be logged out automatically if no operation is conducted
Battery Status
for about five minutes. Once it is logged out, you have to log in again by clicking the "
" on the far right side of the menu bar to add the device. Next,
" button.
English 4