Kenwood HM-L700 Manuel D'instructions page 34

Setting the timer program
In each of PROG. 1 and PROG. 2, the timer data including the operating period and played contents can be
programmed.
Adjust the clock before setting the timer
Connect the related equipment under reference to "Connection of other accessories"
1
Make preparations for the play .
To listen to CD
Only ordinary playback is possi-
ble.
÷ Two timer settings can be reserved independently in two programs PROG.1 and PROG.2.
÷ Please make reservations with an interval of at least one minute, so that the operation times of PROG.1 and PROG.2 do
not overlap.
2
Set the timer setting program number.
1
Press the mode key to get the setting mode.
Then, use the 4 and ¢ keys to select
"TIMER SET" and press the enter/demo
key.
Main unit
\
\
Remote control unit
2
Select "PROG. 1 SET" or "PROG. 2 SET",
and press the enter/demo key.
Main unit
Remote control unit
34 EN
(PROG. TIMER)
¤
The station should be preset pri-
¡£
or.
\
\
\
\
To listen to radio
Each time the 4 or ¢ key is pressed, the display
switches as follows.
"TIMER SET"
"AUTO MEMORY "
(Only when the TUNER input is selected)
"AUX INPUT"
(Only when the AUX input is selected)
"BALANCE"
"A.P.S. SET"
"DISPLAY SET"
"TIME ADJUST"
Each time the 4 or ¢ key is pressed, the display
switches as follows.
1 "PROG. 1 SET" (
2 "PROG. 2 SET" (
÷ When a timer setting has already been made in the
selected timer, the setting will be overwritten by the
new setting.
Timer operation
7
Playing the auxiliary input source
Make timer setting of the compo-
nent connected to the AUX input
jacks.
)
)