Kenwood HM-L700 Manuel D'instructions page 23

One-by-one presetting
Remote control unit only
1
Perform the procedure in "Tuning to a non-
preset radio station (Auto tuning, Manual
tuning)" to receive the station to be preset.
2
Press the ENTER key during reception.
Remote control unit
(Proceed to step 3 while "MEMORY" is lit.)
3
Select one of the preset numbers from
1 to 40.
Remote control unit
Main unit
4
Press the ENTER key again.
Remote control unit
(Repeat steps 1, 2, 3 and 4 to preset other sta-
tions)
(Manual preset)
Main unit
Main unit
Up to 40 stations can be memorized.
÷ To memorize an RDS station, wait for the station
name to appear on the display before performing
step 2.
"MEMORY" lights (for approx. 20 sec.)
÷ If several stations are preset under the same num-
ber, the previous memory is replaced with the latest
memory contents.
Sequence for pressing numeric keys
To input "12" ..... +10, 2
To input "20" ..... +10, +10, 0
Receiving broadcast station Playback of TAPE
23 EN