Publicité
Les langues disponibles
Les langues disponibles
$
Headphones jack
Connect headphones with a stereo mini-plug (sold
separately) here.
%
Remote sensor
Detects signals sent from the remote control unit.
Basic operations in the setting mode
Settings and adjustments are made using the mode
key. Press the mode key to get the setting mode.
Make settings with the 4 and ¢ multi control
keys. Use the enter/demo key to enter settings.
\
\
• When the mode key is pressed followed by the 4
and ¢ multi control keys, the display changes as fol-
lows.
"TIMER SET"
"AUTO MEMORY "
(Only when the TUNER input is selected)
"AUX INPUT"
(Only when the AUX input is selected)
"BALANCE"
"A.P.S. SET"
"DISPLAY SET"
"TIME ADJUST"
• The setting next to ">" is the selected item.
Example: When "ON" is selected
• If an operation is not performed for 20 sec or more, the
setting mode is automatically canceled. (TIME ADJUST
and TIMER SET excluded)
Standby mode
While the on/standby (timer)indicator is lit (red, green), a small amount of power is supplied to the sys-
tem to back up the memory. This is called standby mode. Under the condition, the system can be turned
ON by the remote control unit.
^
#
\
\
^
key
Switches power between ON and standby.
on/standby (timer) indicator
When power is on, the indicator is orange.
When on standby, the indicator lights as follows.
Red
: Ordinary standby
Green : Timer standby
Opening/Closing the door
You can open the door on the top of the main unit
to the section of the operation keys by pressing the
door open/close key.
door open/close key
To close the door, press the door open/close key
again.
• When power is turned OFF, the door automatically
closes.
• Do not force the door shut by hand.
Controls and indicators
System connection
%
11
EN
Publicité
