Kenwood HM-L700 Manuel D'instructions page 21

Collective presetting of stations (AUTO MEMORY)
1
Select the tuner input.
Main unit
2
Press the mode key.
Main unit
3
Use 4 and ¢ to select "AUTO
MEMORY" and press the enter/demo key.
Main unit
Remote control unit
Switching the display
Only from the remote control unit
Remote control unit
Remote control unit
\
\
Up to 40 stations can be memorized.
÷ For use of the RDS function, stations must be memo-
rized by AUTO MEMORY.
÷ RDS stations are given priority during auto presetting.
If there is memory left after presetting, this unit con-
tinues presetting regular FM and AM stations.
÷ A broadcast station that cannot be preset with AUTO
MEMORY should be set with Manual preset.
Each time the DISPLAY key is pressed, the display
switches as follows.
PS (Program service name) \ Frequency \ Clock
÷ The PS indication appears on the display, when a pre-
set RDS broadcast is selected.
Receiving broadcast station Playback of TAPE
£
21 EN