Publicité
Les langues disponibles
Les langues disponibles
minimum and maximum diameter and length
of those core bits.
•
Incorrect clamping and positioning of the
core bit may lead to dangerous situation by
broken and ejected parts of the drill core bit.
Ensure that the drill core bit is assembled and
adjusted correctly. Tighten the core bit with
sufficient fastening torque.
•
Always wear suitable protective equipment
(PPE) such as:
•
Hearing protection, to reduce the risk of
induced hearing loss
•
Gloves, when handling core bits or rough
material, to reduce injuries by sharp edges
•
Safety glasses, to prevent injuries by flying
particles
•
Non-slipping footwear, to prevent injuries
caused by slippery surfaces
•
Hazardous situation due to dust production
when drilling without water supply. Use a
dust extraction device, if any, or at least a
dust mask.
WARNING: We recommend the use of
a residual current device with a residual
current rating of 30mA or less.
Residual Risks
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing
– Risk of personal injury due flying particles.
– Risk of burns due to accessories becoming hot
during operation.
– Risk of personal injury due to prolonged use.
The following factors increase the risk of breathing
problems:
– No dust extractor connected when performing
dry operation
– Insufficient dust extraction caused by uncleand
exhaust filters
Markings on Tool
The following pictograms are shown on the tool:
Safe use warning
Read instruction manual
before use
Wear ear protection
Wear eye protection
No water supply
Water supply
Gear selection
Applications in masonry
Applications in concrete
When using the machine in applications
exceeding the max. allowable diameter
for handheld use, make sure that the
machine is mounted on a stand. Never
use the machine handheld in these
applications, as it will lead to loss of
control and serious injury.
DATE CODE POSITION (FIG. 1)
The Date Code (x), which also includes the year of
manufacture, is printed into the housing.
Example:
2016 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Diamond drilling machine
1 Side handle
1 Open ended spanner, 32 mm
1 Open ended spanner, 41 mm
1 Adaptor for dust extractor
1 Adaptor for water supply
1 Kitbox
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (Fig. 1, 2)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
ENGLISH
31
Publicité
