Locating A Particular Point In A Track - Sony SCD-C222ES Mode D'emploi

Locating a Particular Point
in a Track
You can locate a particular point in a track during play or
play pause.
H lAMSL
Locating a point while monitoring the
sound (Search) Z
Press and hold m/M during play.
You will hear intermittent playback as the disc goes
forward or reverses.
When you reach the desired point, release the button.
Locating a point by observing the time
indication (High-Speed Search) Z
Press and hold m/M during play pause.
You will not hear the playback sound.
z
When "Over!!" appears in the display
The disc has reached its end. Press . or m to go back.
Note
Tracks that are only a few seconds long may be too short for
monitoring. In this case, the player may not search correctly.
H
./>
m/M
Locating a point by setting the start time
(Time Search) Z
1
Turn l AMS L or press ./> to select the
desired track in stop mode.
2
Press and hold m/M to set the time to start play
while looking at the display.
You can set the time from the beginning of the desired
track when you press M at first, and set the time
from the end of the desired track backward's when
you press m at first.
ALL DISCS
1 2 3
DISC TRACK MIN
1 5 2 . 5 7
3
Press H.
Play will start at the time search.
4 5 MULTI 5.1CH
S A C D
SEC
1 2 3 4 5
6 7 8 9 10
17
US