Dräger Polytron 7000 Instructions D'installation page 2

Pump Adapter for AC-Sensor, Installation Instructions
Operation of the Pump Adapter for AC-Sensors with the Polytron 7000 requires full understanding
and strict observance of the Instructions for Use of the Dräger Polytron 7000 (Part No. 90 23 758)!
Intended use
Pump adapter for AC sensors – 83 17 976:
— Together with the calibration adapter 68 09 380 for gassing an AC sensor with the aid of
the pump integrated in the Polytron 7000.
Installation
Insert sensor as described in the Instructions for Use of the Polytron 7000 (9023758).
Slide pump adapter 83 17 976 over the sensor so that the connectors fit into the holes in
the docking station.
Slide calibration adapter over the sensor and turn it clockwise so that the connectors point
to the right and left.
Connect hoses as illustrated.
1
1 Gas infeed from measuring point
3 Calibration adapter, right-hand connector
5 Pump blow-out side
90 23 802 – MA 4683.114 de/en/fr/es
© Dräger Safety AG & Co. KGaA
1st edition - June 2004
Polytron
OK
4 5
2 3
2 Calibration adapter, left-hand connector
4 Pump intake side
6 Exhaust air
Dräger Safety AG & Co. KGaA – Revalstraße 1, D-23560 Lübeck, Germany
Tel. +49 451 8 82 - 27 94 – Fax +49 451 8 82 - 49 91
D
Polytron
OK
6
www.draeger.com