Mitsubishi Electric PAC-YT52CRA Manuel D'installation page 152

Names and functions of controller components
Controller interface
Backlit LCD
button (See Page 7.)
. .
button (See Page 6.)
* To set the functions that are not available on this controller (PAC-YT52CRA) such as Louver,
use MA remote controller or the centralized controller.
ON/OFF lamp
The lamp will light up in green when
turned on, and blink during startup
and when an error occurs.
Pressing this button starts and
stops the operation.
– 4 –
ON
button
OFF
button (See Page 7.)
button (See Page 8.)