Starting And Stopping - Husqvarna 536LiRX Manuel D'utilisation

Starting and stopping

WARNING! Make sure no unauthorised
!
persons are in the working area,
otherwise there is a risk of serious
personal injury. The safety distance is 15
meters (50 ft.).
Starting
Turn on the machine. Press and hold the start button (>1
sec.) until the green LED is lit.
Use the power trigger to control the speed.
IMPORTANT! The cutting attachment being used will be
identified once the machine has been activated and the
throttle depressed. When changing the cutting
attachment from e.g. a trimmer head to a grass blade,
the machine will stop and the LED lamp will flash until
the throttle is released to its original position. The cutting
attachment has now been identified and the machine is
ready to use.
Stopping
Stop the machine by releasing the throttle and the throttle
lockout plus deactivating the machine.
Remove the battery from the machine by pressing the two
release buttons and pulling out the battery.
IMPORTANT! Always remove the battery to prevent the
machine being started by accident.
20 – English
STARTING AND STOPPING