Publicité
Les langues disponibles
Les langues disponibles
6.4
INSTALL THE GRASS CATCHER
7
6
1. Remove the mulch plug(8).
2. Remove the side discharge chute(9).
3. Open the rear discharge door(7) and hold it.
4. Hold the the grass catcher(6) by its handle and engage the
hooks on the door rod.
5. Close the rear discharge door(7).
6.5
INSTALL THE MULCH PLUG
7
8
1. Remove the grass catcher(6).
2. Open the rear discharge door(7) and hold it.
3. Hold the mulch plug(8) by its handle and fit it in the
discharge chute.
4. Close the rear discharge door(7).
6.6
INSTALL THE SIDE DISCHARGE
CHUTE
9
English
10
9
CAUTION
When you use the side discharge chute,
•
do not install the grass catcher.
•
keep the mulch plug installed.
1. Open the side discharge door(10) and hold it.
2. Line up the recesses of the side discharge chute(9) below
the pivot.
3. Close the side discharge door(10).
6.7
SET THE BLADE HEIGHT
The machine can be set to different blade heights.
11
1. Pull the height adjustment lever rearward to increase the
blade height.
2. Pull the height adjustment lever forward to decrease the
blade height.
6.8
INSTALL THE BATTERY PACK
12
15
13
14
WARNING
•
If the battery pack or charger is damaged, replace the
battery pack or the charger.
•
Stop the machine and wait until the engine stops before
you install or remove the battery pack.
•
Read, know, and follow the instructions in the battery
and charger manual.
NOTE
The machine has a battery storage compartment that helps
store the battery pack.
1. Open the battery door(12).
2. Align the lift ribs on the battery pack(13) with the
grooves in the battery compartment.
EN
Publicité
