Télécharger Imprimer la page

KitchenAid KUDP01IL Guide De Référence page 4

Masquer les pouces Voir aussi pour KUDP01IL:

Publicité

Les langues disponibles

Les langues disponibles

4. Add detergent. Always use a high-quality brand detergent.
(See "Dishwasher Use" in the User Instructions.)
5. Run hot water at the sink nearest your dishwasher until the
water is hot. Turn off water.
6. Press the desired cycle and option selections on the top, or
front, of the dishwasher door. (See "Cycles and Options.")
For models KUDP01IL and KUDP01FL: Press START. Or
press START to repeat the same cycle and options as the
previous cycle. The selected cycle and option lights will flash
once.
NOTE: If the dishwasher is not started within 30 seconds after
selecting the cycle and options, it will revert to the last cycle
and options completed.
7. Push door firmly closed. The door latches automatically.
NOTE: The features on your dishwasher may vary from those
in the illustration below.
For Model KUDP01DL:
8. Press the Start pad on the front of the dishwasher door. Or
press the Start pad to repeat the same cycle and options as in
the previous cycle.
NOTE: If the dishwasher is not started within 30 seconds after
selecting the cycle and options, it will revert to the last cycle
and options completed.
4
IMPORTANT:
When the cycle starts, you will see a rotating pattern of lights
in the display window indicating that the unit is operating.
This pattern will continue for up to 6 minutes while the multiple
sensors check the incoming water temperature, rinse aid
usage and soil level on dishes and cookware. The sensors
then determine the ideal cycle for your dish load. After sensing
is complete, the display will show the number of minutes left
in the cycle and the cycle countdown will begin.
The cycle countdown pauses and the water heating light
glows while the dishwasher heats the water to a set
temperature. (See "Cycle Selections.")
LOADING
Top Rack
The top rack is designed for cups, glasses, and smaller items.
Many items, up to 9" (22 cm), fit in the top rack. (See
recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary from the
drawings shown.
10 place setting
12 place setting
Place items so open ends face down for cleaning and
draining.
Load glasses and cups in top rack only. The bottom rack is
not designed for glasses and cups. Damage can occur.

Publicité

loading

Ce manuel est également adapté pour:

Kudp01dlKudp01fl