Technical Data; Guide Bar And Saw Chain Combinations - Husqvarna 536LiP4 Manuel D'utilisation

Technical data

Motor
Motor type
Chain speed, m/sec
3/8
Weight
Weight without battery, Lbs/kg
Weight with battery, Lbs/kg
BLi150
Battery runtime
Battery time, min., (up to) with SavE function activated.
BLi150
Battery time, min., (up to) with SavE function activated.
BLi940x
Sound levels
(see note 1)
Equivalent sound pressure level at the operator's ear, measured
according to EN ISO 60335-91-2 and ISO 22868, dB(A):
Vibration levels
(see note 2)
Vibration levels at handles, measured according to ISO 22867, m/s
Extended shaft front/rear handle
Short shaft front/rear handle
Driving time and temperature are measured without load according to the operating cycle of 3 seconds
operating and 15 seconds of idling.
Batteries approved for 536LiP4, 536LiPT5.
Battery
Type
Battery capacity, Ah
Voltage, V
Weight, lb/kg
Approved chargers for the specified batteries, BLi.
Battery charger
Input Voltage, V
Frequency, Hz
Power, W
Note 1 Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (standard
deviation) of 1 dB (A).
Note 2: Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 2 m/s

Guide bar and saw chain combinations

The following cutting attachments are approved for the models Husqvarna 536LiP4 and 536LiPT5. Only the A318 bar is
used for the 536LiP4 and 536LiPT5.
TECHNICAL DATA
BLi80 BLi150
Lithium-ion Lithium-ion
2,1 4,2
36 36
1,7/0,8 1,3/2,8
QC330 QC80
100-240 100-240
50-60 50-60
330 100
536LiP4
BLDC (brushless) 36V BLDC (brushless) 36V
20
7.5/3.4
10.1/4,6
60
88
2
1.0/0.9
-
536LiPT5
20
11.02/5
13,6/6,2
60
83
1.0/1.2
1.4/1.2
2
.
English – 29