Connection And Disconnection; Preliminary Checks - Vima MESIS Perfect Waves Pressomassage PSG-PW Manuel D'utilisation

User manual: Perfect Waves PressoMassage
All beauty devices are tested and developed by the manufacturer before shipping and
delivery to the customer.
The product is designed, manufactured and tested to meet all the specific standards (see
declaration of conformity), when correctly connected.
If the connection, use and/or maintenance of the Perfect Waves PressoMassage device are
not implemented perfectly, anomalies during use may occur. In addition, safety problems
may take place. Inappropriate connection and maintenance shall void the terms of warranty.
WARNING
THE DEVICE CAN BE ACTIVATED ONLY AFTER BEING CONNECTED
PROPERLY.
Before connecting and activating the Perfect Waves PressoMassage device, remove any
protection against dust, moisture and any packaging material.

Preliminary checks

Check of any damage
Check that the different parts of the device do not have physical damage due to shocks,
tears or abrasion.
In particular, check that:
• There are no scratches or dents, indicating shocks occurred during transport.
• The electrical power cable and its plug are not damaged.
• No water, moisture entered during transport and/or condensation formed. If this is the
case, wait at least 30 minutes before carrying out any further operation.
The lighting system (natural and/or artificial) of the area of connection must guarantee the
following minimum lighting value: 200 lux.
Damage claim procedure
If any damage is identified, interrupt the procedure underway and report the nature of
damage found to the customer service office of the reseller or manufacturer.
Connection, disconnection
NOTE
THE MANUFACTURER CANNOT BE HELD IN ANY CASE RESPONSIBLE FOR
ACCIDENTS OR DAMAGE RESULTING FROM THE USE OF THE DEVICE
IN AN ELECTRICAL SYSTEM THAT DOES NOT COMPLY WITH THE LEGAL
REQUIREMENTS.
Before connecting/disconnecting the machine from the power supply, make sure to switch it
off and turn the general switch to OFF.
Now you can connect/disconnect the machine from the power socket.

Connection and disconnection

67
English