Unpacking Instructions; Handling; Locations - Vima MESIS Perfect Waves Pressomassage PSG-PW Manuel D'utilisation

User manual: Perfect Waves PressoMassage
The Perfect Waves PressoMassage device is provided into a rigid box.
According to the purchased configuration, into the box you can find:
• Compressor
• 4-chamber legs
• 4-chamber armband
• 4-chamber abdominal/glutes band
• Slim Body Kit, abdominal/glutes band + single connector + splitter for simultaneous user
of the two legs 2 with the band
• Single connector (for band, leg or armband)
• Splitters
• Multi-language manual
The optional and spare accessories can be purchased at Vima S.r.l..
1. Unpack the device carefully.
2. Check that no damage due to transport is present.
3. Check that the standard equipment is complete.
4. If a component is missing or damaged, we invite you to refer to your reseller within and
no later than 5 days from delivery.
5. The packaging material is not a baby toy! Keep plastic bags away from children. Choking
hazard!

Locations

It is important to bear some aspects in mind before proceeding with the handling and
positioning of the product (either for the use or the storage). In particular, it is necessary to
check some factors:
• The Perfect Waves PressoMassage device must be positioned in non-corrosive atmo-
sphere. Corrosives such as acids can ruin the surface of cables, electronic and optical
components.
• The position of the Perfect Waves PressoMassage device must be chosen so that it may
not be hit by steam jets, water or other liquids.
• Position the Perfect Waves PressoMassage device in a ventilated place and DO NOT ob-
struct its aeration grids. Dust particles in the air must be reduced to a minimum as they
can damage the surface of the optical components. The metal particles, if any in the air,
can corrode the electronic components.
• The minimum distance between the device and the wall must be at least 50 cm (19.68
in) during operation.
• The temperature of the environment where the device is stored must be between 10°C
(50°F) and +55°C (131°F).
• The temperature of the environment where the device is used must be between 10°C
(50°F) and +40°C (104°F).
• Moisture conditions between 30% and 85%.

Unpacking instructions

Handling

65
English