Technical Characteristics; Technical Information; Terminology - Vima MESIS Perfect Waves Pressomassage PSG-PW Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

User manual: Perfect Waves PressoMassage
• La Mesis Perfect Waves PressoMassage is sequential and intermittent
• Adjustable and continuous pressure
• 6 selectable programs
• Optimum massage through 4 selectable chambers
• Integrated timer for the adjustment of the duration of massage
• Control valve to ensure constant pressure
• Quick accessory connection and easy machine use

Technical information

Power input
Frequency
Power consumption
Treatment time
Weight
Dimensions
Programs
Applicators
Before connecting the device, check that the voltage data indicated on the ID plate
correspond to that of the power supply available. The ID label is placed on the device.

Terminology

• Program: chamber inflation mode
• Chambers or Sectors: elements which the applicator is made up of and which fill up
with air. In Mesis Perfect Waves PressoMassage there are 4 applicators chambers.
• Cycle: 1 cycle corresponds to the inflation of all chambers, from the first one to the last
one, regardless of the program used. After inflating the last chamber, there is a pause
and then a new cycle starts
• Applicator: Pneumo-distension element made up of several chambers that inflate on a
sequential basis according to the chosen program (legs, armband and abdominal/glutes
band)
• Time: duration of session (adjustable from 1 to 60 minutes)
• Pressure: amount of air injected into the chambers. Pressure is adjustable and conti-
nuous
• Connector: it is an accessory made up of joined rubber tubes and allows to connect the
applicators to the machine or to the splitter
• Splitter: it is an accessory made up of joined rubber tubes. The use of 1 splitter allows
to use the two legs while the use of 2 splitters allows to use three accessories at a time,
e.g. the two legs and the abdominal/glutes band
• Spout: end (air outlet) of each tube of the connector which has to be inserted into the
grafts located on the applicators
• Graft: seat located on the applicators where the connector spouts have to be inserted

Technical characteristics

220/240 V A.C. ±10%
50/60 Hz
30 W
Adjustable range between 0 and 60 minutes
4,48 kg
240 X 200 X 115 mm
6 program
4 chambers
57
English

Publicité

Table des Matières
loading

Table des Matières