Sagi FERMA LIEVITA Manuel D'installation, D'utilisation Et D'entretien page 42

ENGLISH
The first values displayed are type and end
programme type.
P2 End Prog
3.
the end programme time flashes; with keys
When changed, press the
the value.
P2
02:00
4.
move into the BLOCK phase.
GB
P2
02:00
5.
the duration of the phase flashes; with keys
When changed, press the
the value. the temperature value flashes. With
keys
value. Press key
temperature value.
P2 Preservation
02:00
6.
move into the PRESERVATION phase.
Pressing keys
with keys
the value. When changed, press the
to confirm the value.
P2 Awakening
02:00 20°C
7.
move into the WAKENING phase. Pressing
key
with keys
the value. When changed, press the
to confirm the value. the temperature value
flashes. Follow these instructions until the
humidity value has been changed.
P2 Rising
06:00 30°C
8.
move into the PROVING phase. Pressing key
, the duration of the phase flashes; with
keys
value. When changed, press the
13:00
Pressing key
it is possible to change the value.
key to confirm
Locking
-20°C
Press key
Locking
-20°C
Pressing key
it is possible to change the value.
key to confirm
it is possible to change the
to confirm the new
-16°C
Press key
the temperature flashes;
it is possible to change
70%
Press key
, the duration of the phase flashes;
it is possible to change
80%
Press key
it is possible to change the
confirm the value. the temperature value
flashes. Follow these instructions also, for the
humidity values.
,
P2 Slowing
9.
move into the SLOW DOWN
Pressing key
flashes; with keys
change the value. When changed, press the
to
key to confirm the value. the humidity
value flashes. with keys
possible to change the value. When changed ,
press key
confirm.
to
key
to
10. Press key
Press key
following will be displayed:
key
indicates that the as a result of the settings, the
programme will end on 3 July 2006. If the date
determined is correct, press key
and start up the programme, otherwise press key
to
to change the end programme date. This
function is enabled by parameter P70=1.
On display:
flashes, with key
key to
12
15°C 70%
Press key
, the temperature value
it is possible to
P2 End Prog
13:00
P2 Prog End
13:00
P2 Locking
02:00 -20°C
P2 Preservation
-16°C
P2 Awakening
02:00 20°C 70%
P2 Rising
06:00 30°C 80%
P2 Slowing
15°C 70%
, to re start cycle 4.
, to carry out the programme, the
End Prog
Mon 03/07/06
End Prog 09:05
Mon 03/07/06
move the date of the end
to
phase.
it is
to
to confirm
.The day