Sagi FERMA LIEVITA Manuel D'installation, D'utilisation Et D'entretien page 41

To change further the temperature values, repeat
the procedure or to start the heating phase, press
Conditioning
Menu 01
Manual
1.
STAND-BY, press key
01 MANUAL.
Air Con
T=20°C UR=65%
2.
pressed, the manual cycle setting mode is
entered. With keys
to pass from one phase to another and the
cycle phase is displayed on the display: select
the CONDITIONING phase.
Manual. 13:39
T=15°C UR=65%
3.
the temperature flashes; with keys
it is possible to change the value.
4. When changed, press the
the value: the humidity value flashes. With
keys it is possible to change the
value.
Menu 02: Automatic Cycle
There are 7 Programs to be selected P01...P07
and each automatic cycle is made up of five
phases:
1. BLOCK PROVING ACTIVITY
2. PRESERVATION
3. REAWAKENING
4. PROVING
5. SLOW DOWN ACTIVITY
At the end of each phase, the following phase
automatically activates.
1. With the machine in STAND-BY, press key
and select
Menu 02
Automatic
. Press key
cycle setting mode:
. With keys
from one programme to another and the
programme number is displayed.
With the machine in
and select menu
If the key is
, it is possible
Pressing key
key to confirm
the menu
with keys
to enter the automatic
Automatic
P1
it is possible to move
key .
5. Press key
value.
To change further the temperature values, repeat
the procedure or to start the air conditioning
phase, press key
Apart from the cycle in course, the first line
indicates that a manual cycle phase is being
carried out and the current hour is 13:39.
The second line indicates the cell temperature, in
this example 15°C and if the use of the humidity
probe is enabled, the humidity measured by the
probe in this example is 65°%.
Press Key to return to the SET display and
to make any
Manual. 13:39
T=15°C UR=65%
possible to visualise the phase in course.
The Key starts and stops the phase in
course.
Automatic
Automatic
Automatic
Automatic
Automatic
Automatic
Automatic
2. Press key
setting mode
function is available only if, parameter P69=1.
11
ENGLISH
to confirm the new humidity
.
necessary modifications,
pressing key , it is
P1
P2
P3
P4
P5
P6
P7
to enter the Programme
P2 End Progr
13:00
, this
GB