Bosch GCL 2-160 Consignes D'utilisation/De Sécurité page 19

All modes except for point operation can be selected both with and
without automatic levelling.
Working with Automatic Levelling
On/Off switch 2 in position
" "
Press button for "line &
point" operating mode
6 once
Press button for "line &
point" operating mode
6 twice
Press button for "line &
point" operating mode
6 three times
Press button for "line &
point" operating mode
6 four times
If the measuring tool is outside of the self-levelling range, the laser
lines and/or points will flash quickly.
If during work with automatic levelling you switch to the "working with-
out automatic levelling" mode (On/Off switch 2 in position "
first combination of this mode's indicators is always activated.
● ●
Cross-line ●
operation
● — —
— ● —
— — ●
● ●
Cross-line ●
operation
-19-
green B1
green C1
green D1
green E1
green B1
"), the