Publicité
Les langues disponibles
Les langues disponibles
EN
2.4
Using and handling the power
tool
a) Do not overload the tool. Use the intended
power tool for your work.
You work better and safer within the given power
range if you use the suitable power tool.
b) Do not use a power tool whose switch is
defective.
A power tool which can no longer be switched
on or off is dangerous and must be repaired.
c) Remove the plug from the plug socket and/
or remove the battery before carrying out
tool adjustments, changing accessories or
placing the tool aside.
This precautionary measure prevents
unintentional starting of the power tool.
d) Store power tools out of the reach of
children when not in use. Do not allow
people to use the tool unless they are
familiar with it, or if they have not read this
instruction manual.
Power tools are dangerous if they are used by
inexperienced people.
e) Maintain power tools and insert tools with
care. Check whether moving parts are
in proper working order and do not jam,
whether parts are broken or damaged in
such a way that they impair the function of
the power tool. Have damaged parts repaired
before using the power tool.
Many accidents are caused by poorly serviced
and maintained power tools.
f) Keep cutting tools sharp and clean at all
times.
Carefully maintained cutting tools with sharp
cutting edges jam less easily and are easier to
control.
g) Use the power tool, accessories, insert
tools, etc. in accordance with this
instruction manual. Take into consideration
the working conditions and the work to be
carried out.
Use of power tools for other than the intended
applications can lead to dangerous situations.
h) Keep the handles and gripping surfaces dry,
clean and free from oil and grease.
Slippery handles and gripping surfaces prevent
safe operation and control of the power tool in
unforeseen situations.
| 30 |
2.5
Service
a) Have your power tool repaired by qualified
personnel only and use original spare parts
only.
This will ensure that the safety of the power tool
is maintained.
2.6
Safety instructions for dry
diamond drilling systems
2.6.1 Operating personnel
requirements
•
People below the age of 18 may not use the
machine.
•
The operating personnel must be familiar
with the content of this instruction manual.
2.6.2 Safety instructions for all work
•
Wear hearing protection when hammer
drilling/diamond drilling.
Exposure to noise can cause loss of hearing.
•
Use the additional handle(s).
Loss of control can result in injuries.
•
Support the power tool properly before
using.
This power tool produces a large torque. If the
power tool is not properly supported during use,
the use can loose control of it and injuries can
occur.
Publicité
