Baier Elektrowerkzeuge BDB 8295 Traduction De L'original Du Mode D'emploi page 27

Contents
1 About this instruction manual ........... 28
1.1 Important information ............................. 28
1.2 Symbols used in the instruction manual 28
2 Safety Instructions .............................. 28
2.1 Workplace safety .................................... 29
2.2 Electrical safety ...................................... 29
2.3 Safety of people ...................................... 29
2.4 Using and handling the power tool ......... 30
2.5 Service .................................................... 30
2.6 Safety instructions for dry diamond
drilling systems ....................................... 30
2.6.1 Operating personnel requirements ........ 30
2.6.2 Safety instructions for all work ............... 30
2.6.3 Workplace safety .................................... 31
2.6.4 Electrical safety ...................................... 31
2.6.5 Safety of people ...................................... 32
2.6.6 Hazards when using and handling the
power tool ............................................... 33
2.6.7 Safety instructions for using long drill
bits .......................................................... 33
2.6.8 Hazards when using and handling the
drill stand ................................................ 33
2.6.9 Service / Maintenance / Repair .............. 34
2.6.10 Explanation of the pictograms on the
machine .................................................. 35
3 Technical Characteristics ................... 36
3.1 Drive unit technical specifications ......... 36
3.2 Drill stand technical specifications ........ 37
3.3 EU Declaration of Conformity ................ 37
3.4 Machine characteristics ......................... 37
3.5 Machine parts and controls .................... 37
3.6 Intended use ........................................... 38
4 Before Starting Work ........................... 38
4.1 Setting the speed ................................... 39
4.2 Connecting the dust extraction ............. 39
4.2.1 Mounting the extraction tube .................. 39
4.2.2 Dismantle extraction tube ...................... 39
4.2.3 Connect dust extractor ........................... 39
4.3 Fitting or replacing the diamond drill bit . 39
5 Setting up the BST 420 drill stand
(optional accessories) ......................... 39
5.1 Installing the drill rig with plug fixing ...... 40
5.2 Fixing onto the wall ................................. 40
5.3 Fixing the drill stand with a quick-
action pillar ............................................. 40
5.4 Installing the drill stand with vacuum
kit (accessory) ........................................ 40
5.5 Adjusting the inclination angle at the
drill stand ................................................ 40
5.6 Fixing the drive unit to the drill rig .......... 41
6 Operation and Control ......................... 41
6.1 Starting drilling ....................................... 41
6.2 Ending the drilling process ..................... 42
7 Cleaning ................................................. 42
7.1 Cleaning the teeth and guide on the
drill stand pillar ....................................... 42
7.2 Cleaning and greasing the eccentric
shaft ........................................................ 42
8 Maintenance .......................................... 43
9 Handling Diamond Core Drill Bits ...... 43
10 Disposal ................................................. 43
11 Scope of Supply ................................... 44
12 Warranty ................................................ 45
Imprint
Version V01 / 2021-02
Copyright:
Maschinenfabrik
OTTO BAIER GmbH
Heckenwiesen 26
71679 Asperg
Germany
It is prohibited to forward or reproduce this
document or to exploit and disclose its contents,
unless expressly permitted. Any infringements will
result in liability to pay compensation for damages.
All rights reserved in case of patent, utility model or
design registration.
This instruction manual has been prepared with
the greatest possible care. Nonetheless, OTTO
BAIER GmbH does not accept any liability
whatsoever for possible errors in this instruction
manual and their consequences. Equally, no liability
whatsoever is accepted for direct or consequential
damage or losses resulting from improper use of the
machine.
The national health and safety regulations and the
requirements of this instruction manual are to be
observed when using the machine.
All product names and brand names used are the
property of the holder and are not explicitly marked
as such.
Subject to change without notice.
| 27 |